SPV 50

They are suitable for the transfer of liquids containing impurities up to 3 mm in size. The hydraulic components: impeller, scroll and pump body in Nylon, allow it to be used with water, emulsions and oily substances in general, with a viscosity not exceeding 21 cSt (3 � Engel). The liquid temperature must not exceed 70 � C.


They are commonly used on:

  • machine tools (milling-lathes)
  • machines for glass processing (TRI version on 200 and 270 floats)
  • printing machines
  • air conditioning and conditioning systems
  • spray booths

They should normally be installed on a tank with a capacity proportionate to the flow rate, about 3-4 cm from the bottom. It is important to check that the maximum level of the liquid in the tank always remains 3-4 cm lower than the support flange (see figure). In cases where the liquid is particularly dirty, it is recommended to build the tank with compartments, to allow the deposit of sludge before it is fished out by the pump. For different uses it is advisable to consult our Technical Department.

Rating plate data

Attributo Valore
Potenza 1 (kW) 1
Potenza 2 (kW) 0,75
Conn. Idraulica (") 1 1/4
Portata Massima (l/min) 263
Prevalenza Massima (mt) 12
Dim max impurità (mm) 3
Tipo girante Open


Materiale Opzione Materiale
Girante Nylon
Corpo Pompa Nylon
Chiocciola Nylon
Albero Aisi 416


Contact Us

For further information about this product or if you want to know if it's right for your application contact us using the following form